Pedals that stack with the Marshall JCM800 2203

pushes an already-dirty tonePushes an already-dirty tone harder and tightens it up. (crunchy → clean boost)

Push the JCM800's aggressive midrange gain with the BB Preamp's creamy treble boost and the crunch gets tighter, not muddier.

Goes in front of the amp

gain stackingStacks two gain stages for more saturation than either produces alone. (mid-forward → fuzzy)

Put Colorsound Overdriver in front and the mid-forward tone leans further toward fuzzy

Goes in front of the amp

pushes an already-dirty tonePushes an already-dirty tone harder and tightens it up. (crunchy → clean boost)

The JCM800's aggressive, midrange-forward gain pushes the King of Tone's transparent boost further into breakup.

Goes in front of the amp

The JCM800's aggressive, midrange-forward gain gives the Octavia's rich octave-fuzz lead a classic amp voice to push into.

Goes in front of the amp

pushes an amp at the edge of breakupPushes an amp already sitting at the edge of breakup over the line. (edge of breakup → mid-forward)

Feed the JCM800's aggressive midrange crunch with the DLS's own plexi character for a rawer, more saturated rock tone.

Goes in front of the amp

pushes an amp at the edge of breakupPushes an amp already sitting at the edge of breakup over the line. (edge of breakup → mid-forward)

The JCM800's own aggressive midrange bite is basically what the PlexiTone emulates — running it into the real amp just adds another gain stage of the same character.

Goes in front of the amp

pushes an already-dirty tonePushes an already-dirty tone harder and tightens it up. (high gain → mid-forward)

Marshall JCM800 2203 pushes a high gain tone toward mid-forward

Goes in front of the amp

pushes an already-dirty tonePushes an already-dirty tone harder and tightens it up. (high gain → mid-forward)

Stack Marshall JCM800 2203 on top and a high gain tone tightens toward mid-forward

Goes in front of the amp

What Marshall JCM800 2203 brings here leans toward crunchy — that's worth building a pairing around

Goes in front of the amp

pushes an already-dirty tonePushes an already-dirty tone harder and tightens it up. (high gain → mid-forward)

Feed a high gain signal into Marshall JCM800 2203 and it comes out closer to mid-forward

Goes in front of the amp

pushes an amp at the edge of breakupPushes an amp already sitting at the edge of breakup over the line. (edge of breakup → mid-forward)

Marshall JCM800 2203 takes that edge of breakup character and pushes it toward mid-forward

Goes in front of the amp

pushes an already-dirty tonePushes an already-dirty tone harder and tightens it up. (high gain → mid-forward)

Marshall JCM800 2203 pushes a high gain tone toward mid-forward

Goes in front of the amp

gain stackingStacks two gain stages for more saturation than either produces alone. (fuzzy → clean boost)

What Marshall JCM800 2203 brings here leans toward crunchy — that's worth building a pairing around

Goes in front of the amp

Marshall JCM800 2203's own crunchy character is the real reason this is worth trying

Goes in front of the amp

Marshall JCM800 2203 leans toward crunchy, and that's a real, usable character to pair with

Goes in front of the amp

sits in the right chain slotPlaced for where it does its job cleanly in the chain, not for a tonal interaction with the anchor.

Run Origin Effects MAGMA57 Amp Vibrato & Drive after Marshall JCM800 2203 in the signal chain, clear of Marshall JCM800 2203's own gain stage

Goes in front of the amp

pushes an already-dirty tonePushes an already-dirty tone harder and tightens it up. (high gain → mid-forward)

Feed a high gain signal into Marshall JCM800 2203 and it comes out closer to mid-forward

Goes in front of the amp

Marshall JCM800 2203 leans toward crunchy, and that's a real, usable character to pair with

Goes in front of the amp

Marshall JCM800 2203 leans toward crunchy, and that's a real, usable character to pair with

Goes in front of the amp

pushes an already-dirty tonePushes an already-dirty tone harder and tightens it up. (high gain → mid-forward)

Marshall JCM800 2203 takes that high gain character and pushes it toward mid-forward

Goes in front of the amp

pushes an already-dirty tonePushes an already-dirty tone harder and tightens it up. (high gain → mid-forward)

Marshall JCM800 2203 takes that high gain character and pushes it toward mid-forward

Goes in front of the amp

pushes an already-dirty tonePushes an already-dirty tone harder and tightens it up. (high gain → mid-forward)

Feed a high gain signal into Marshall JCM800 2203 and it comes out closer to mid-forward

Goes in front of the amp

pushes an already-dirty tonePushes an already-dirty tone harder and tightens it up. (high gain → mid-forward)

Stack Marshall JCM800 2203 on top and a high gain tone tightens toward mid-forward

Goes in front of the amp

pushes an already-dirty tonePushes an already-dirty tone harder and tightens it up. (high gain → mid-forward)

Stack Marshall JCM800 2203 on top and a high gain tone tightens toward mid-forward

Goes in front of the amp