The JAM Pedals Eureka! Fuzz v2 is a Jam Pedals fuzz pedal, currently around $219. Close alternatives include the JAM Pedals Octaurus and the JHS Pedals JHS Coyote. It pairs well with the Fender Vibrolux 6G11 and the Gibson Les Paul LP-1 Preamp.

JAM Pedals Eureka! Fuzz v2

Jam Pedals · pedal

The JAM Pedals Eureka Fuzz V2 is a handmade Greek boutique fuzz pedal based on the Shin-ei FY-6 Super Fuzz circuit from the late 1960s. It delivers a thick, harmonically rich upper-octave fuzz with strong midrange character and a distinctive woolly texture. The dual-octave coloring gives guitar notes a singing, almost synth-like shimmer when played in higher positions. JAM Pedals hand-assembles each unit in Athens, Greece, using carefully selected components to maintain circuit authenticity. The Eureka Fuzz V2 suits psychedelic rock, garage rock, and classic fuzz tones where upper harmonic content and mid-forward aggression are priorities. It responds well to guitar volume knob adjustments and rewards players who want a pedal with a pronounced, character-driven identity rooted in vintage Japanese fuzz design.

What stands out

  • “Thick upper-octave fuzz with a woolly, harmonically saturated character that sits between a classic Super Fuzz and a modern high-gain fuzz”

    — from the community notes

  • “The dual-octave coloring gives guitar notes a singing, almost synth-like shimmer when played in higher positions”

    — from the listing

  • “The circuit does , and the single-octave shimmer can become overwhelming in busy arrangements”

    — from the reviews

  • “It delivers a thick, harmonically rich upper-octave fuzz with strong midrange character and a distinctive woolly texture”

    — from the listing

  • “The Eureka Fuzz V2 suits psychedelic rock, garage rock, and classic fuzz tones where upper harmonic content and mid-forward aggression are priorities”

    — from the listing

  • thick
  • shimmer
  • octave
  • octave fuzz
  • synth
  • woolly
  • fuzz
  • psychedelic

Price updated Oct 24, 2026

Genres the JAM Pedals Eureka! Fuzz v2 is commonly used in

  • Garage Rock
  • Rock
  • Indie Rock
  • Experimental
    citedInferred from shared tonal signals, not a stated genre tag.
  • Psychedelic Rock
    citedInferred from shared tonal signals, not a stated genre tag.
  • Stoner Rock
    citedInferred from shared tonal signals, not a stated genre tag.

Amps that pair well with the JAM Pedals Eureka! Fuzz v2

Pedals that stack with the JAM Pedals Eureka! Fuzz v2

Catalinbread Adineko

Catalinbread

23% match

sits in the right chain slotPlaced for where it does its job cleanly in the chain, not for a tonal interaction with the anchor. (fuzzy → modulated)

Keep Catalinbread Adineko after JAM Pedals Eureka! Fuzz v2 in the signal chain, clear of JAM Pedals Eureka! Fuzz v2's own gain stage

Comes later in the signal chain

Walrus Audio Ages

Walrus Audio

22% match
$199via Reverb

gain stackingStacks two gain stages for more saturation than either produces alone. (fuzzy → clean boost)

Put Walrus Audio Ages in front and the fuzzy tone leans further toward clean boost

Comes earlier in the signal chain

JHS Colour Box V2

JHS Pedals

21% match
$385.84via Reverb

gain stackingStacks two gain stages for more saturation than either produces alone. (fuzzy → clean boost)

JHS Colour Box V2 stacks clean boost on top of the fuzzy already here

Comes later in the signal chain

Hungry Robot The Borderland

Hungry Robot

15% match

sits in the right chain slotPlaced for where it does its job cleanly in the chain, not for a tonal interaction with the anchor. (fuzzy → modulated)

Put Hungry Robot The Borderland after JAM Pedals Eureka! Fuzz v2 in the signal chain, clear of JAM Pedals Eureka! Fuzz v2's own gain stage — goes in the amp's FX loop (or last, into a clean amp)

Comes later in the signal chain

Pigtronix Echolution

Pigtronix

15% match

sits in the right chain slotPlaced for where it does its job cleanly in the chain, not for a tonal interaction with the anchor. (fuzzy → modulated)

Keep JAM Pedals Eureka! Fuzz v2's full voice out front: Pigtronix Echolution goes after JAM Pedals Eureka! Fuzz v2 in the signal chain so its ambient voice doesn't muddy it — goes in the amp's FX loop (or last, into a clean amp)

Comes later in the signal chain

Jackson Audio Bloom V2 Compressor/EQ

Jackson Audio

12% match
$263.20via Reverb

shapes the dynamic responseShapes how the tone responds to picking dynamics rather than its frequency or gain.

What JAM Pedals Eureka! Fuzz v2 brings here leans toward full — that's worth building a pairing around

Comes earlier in the signal chain

EarthQuaker Devices Swiss Things

EarthQuaker Devices

$291.55via Reverb

EarthQuaker Devices Utility Series Buffer Preamp

EarthQuaker Devices

tonal match
$79via Reverb

Comes later in the signal chain

EarthQuaker Devices Utility Series Buffer Preamp stacks clean boost on top of the fuzzy already here

Cheaper alternatives

Boutique & premium upgrades

Similar charactersee all similar tone character →

See all alternatives to the JAM Pedals Eureka! Fuzz v2 (cheaper + boutique) →

Questions people ask

What are good alternatives to the JAM Pedals Eureka! Fuzz v2?+

The closest matches in character are the JAM Pedals Octaurus, the JHS Pedals JHS Coyote, the Behringer SF300 Super Fuzz. Budget picks: Warm Audio Foxy Tone Box, Catalinbread Perseus, Catalinbread Fuzzrite Germanium. Boutique upgrades: Spaceman Nebula Fuzz/Octave Blender, Suhr Thornicus Ian Thornly Signature Fuzz, Univox Super-Fuzz.

What pairs well with the JAM Pedals Eureka! Fuzz v2?+

Strong matches from rig and tone-complementarity evidence: Fender Vibrolux 6G11, Gibson Les Paul LP-1 Preamp, Magnatone 510 — Run fuzzy into Fender Vibrolux 6G11 for more modulated on top.

How much does the JAM Pedals Eureka! Fuzz v2 cost?+

Around $219 (live listing price, updated Oct 24, 2026).

Compare

Related searches